Aktuelle Zeit: Do 28. Mär 2024, 17:48

Alle Zeiten sind UTC + 1 Stunde




Ein neues Thema erstellen Auf das Thema antworten  [ 26 Beiträge ]  Gehe zu Seite 1, 2, 3  Nächste
Autor Nachricht
BeitragVerfasst: So 9. Aug 2015, 20:46 
Basierend auf meinen alten Umfragen dachte ich mir, lege ich hier mal einen Thread an, in dem ich weiter Ideen für bessere Kameras sammeln kann.
Wenn etwas nicht völlig unwahrscheinlich ist für die Umsetzung (wirtschaftlich unattraktiv, schon abgelehnt etc.) oder gar zu extreme Nische in der Nutzerschaft, füge ich das hier dann auch immer wieder mal in den Startpost ein.
Wer nicht damit zurechtkommt, dass ich als Threadstarter entscheide, ob und wie ich hier etwas nachtrage, sollte sich nicht mit diesem Thread bemühen und einen eigenen aufmachen.
Alle anderen Vorschläge sind gerne willkommen.

1) Reine Kamerafirmwareverbesserungen:

  1. allow RAW/Fx button to toggle between two sets of User modes switchable from the mode dial (adding a
  2. second set U4, U5 and U6)
  3. option to allow saving three separate DNG files for an HDR instead of one combined
  4. provide option for user to calibrate electronic level if needed
  5. option to display chosen focus point as overlay to photo playback on display
  6. option to have the built-in flash trigger wirelessly off camera flashes in PTTL HSS (not do HSS itself, but trigger the other one into HSS)
  7. bring back the two picture synopsis from the K-5I
  8. allow user to switch video SR between software SR and hardware SR (like K-5)
  9. allow user to choose focus peaking color (now: white)
  10. allow user to choose between MJPEG and AVCHD
  11. allow locking/unlocking the backside buttons by pressing "ok" button for 3 seconds
  12. allow user to ignore automatic limitations on SR use (e.g. SR is switched off for 2 second timer shots and others)
  13. offer aperture bracketing mode
  14. offer focus bracketing mode (n pictures, m size focus advance steps)
  15. support USB 3 wired tethering with allowing remote manual stepwise focus adjustments
  16. option to display RAW histogram instead of JPG histogram
  17. option to allow choosing any shutter speed when in M mode with flash or flash trigger attached on hot shoe
  18. bring back the extended bracketing options from the K-5 series
  19. allow option to block shutter if SR is not ready yet
  20. allow user to switch AF drive between SDM and screwdrive for SDM lenses
  21. option to display timer in large on backside display for both self-timer modes, interval shooting and exposure times beyond 1 sec
  22. provide option to choose maximum/longest shutter time in AutoISO freely (not just a few options)
  23. option to display ETTR headroom on backside display (that is how much more you could expose the correct exposed picture without clipping to white; this picture would then be overexposed but could be corrected in post processing; based on RAW histogram)
  24. allow user to set longest shutter time when using slow sync flash mode (currently goes up without limits)
  25. provide option to zoom in to focus point chosen when displaying picture on backside display, not always center of picture
  26. allow user to switch off info menu intermediary step (no more two clicks plus control pad to switch off)
  27. allow Software-focus-limiter for macro lenses (or all lenses)
  28. allow focus peaking during video capture (not only before)
  29. allow microphone input level control during video (not only before)
  30. user setting to choose size of autofocus points (large, medium, small) for cross type autofocus sensors. Where "large" is the current default state.
  31. allow AF-Correction for Zoom lenses in 3 step (close/medium distances/far)
  32. allow option to have mirror up on 10sec timer just as it is on 2sec timer
  33. allow non-open-aperture-metering with non-A-lenses, so that using them in Av-mode does not require pressing the green button any longer. For Av mode simply do not let the camera automatically open up the aperture fully, but instead leave the aperture as it is (set by the aperture ring).
  34. allow user to switch between SD cards to writo onto via press of a button (configurable button, at least Raw/Fx).
  35. allow advanced matrix metering variants which do to target 18% grey but a ETTR logic with user choice of maximum % of pixels to clip in highlights. Default should be 1% and other options should include 0%, 0,1%, 0,25%, 0,5%, 1%, 2%, 5%. Suboption to define this overall or by RGB channel.
  36. option to display current focal length in the backside display, especially for zooms
  37. bring back the underexposure clipping display / zebras from the K-5
  38. allow more customization of the autofocus in AF.C to include (reference the options in a Canon 5D3): acceleration of adjusting focus (how quickly focus will be adjusted from near to far); following/tracking of AF points when the subject is being handed over from one AF point to another
  39. automated support for AF adjustments. The camera could shoot automated picture series of 21 pictures, each one with a plus one adjustement starting from -10 up to +10. User could select how many shots to be fired at one stage (e.g. 1-10 shots each). The camera should also automatically unfocus to one extreme position after each shot. This is what users today do and it is a pain to do manually.
  40. add option for multiexposure to use a mode "dark"
  41. allow a maximum of 7 or even 9 instead of only 5 bracketing shots.
  42. option to automatically tilt the selected AF point depending on landscape/portrait orientation of the camera
  43. option to drive AF to target hyperfocal distance (yes, this would require the camera to calculate subject distance a little bit more precise.
  44. add menu option to define one stable underlying exposure compensation level as user preset. This then would be applied in addition to the normal exposure compensation to allow users who always want a darker exposure to still have the "normal" exposure compensation to be set at zero.
  45. improved focus distance data in the metadata / exifs
  46. Open source API for firmware
  47. Live bulb like Olympus has
  48. increase maximum possible steps for bracketing from +/- 2 to +/- 3
  49. allow all camera settings to be saved by the user to a xml/txt file stored on the SD card and to load/import it later.
  50. allow user to import lens correction data into the camera (e.g. for legacy glass) and describe file format for this and/or offer PC software to define it. maybe build on Adobe lens correction profile editor
  51. Crop mode: user definable per lens
  52. Extend autofocus fine correction range to +/-12 or more.
  53. allow option to have mirror up after each shot in an interval shooting series. Or just leave the mirror up all the time then.
  54. Option to have smaller, reduced resolution Raw-files (s-Raw and m-Raw similar to Canon).
  55. Option to have time lag between the four Pixelshift shots increased to 0,5-1 second and then trigger flashes for each (to allow flash recycling and make use of pixelshift in studio)
  56. Option to do bracketing using the electronic shutter
  57. allow selecting longer shutter times than 30 seconds up to 1 hour
  58. allow user to freely choose self timer delay between 2 seconds and 1 minute
  59. option to continue writing JPGs to SD card #2 after switching from RAW+ to JPG
  60. Support aperture automation with old K and M type lenses (no need to alter hardware, just firmware)
    How:
    1) Once the camera user attaches a new lens without contacts the camera asks if it is a new unknown lens or one already stored (displays stored lenses overview if required)
    1a1) if already stored load data from memory (or sd card) after displaying a list of sored lenses and selecting it.
    1a2) display message to user to turn aperture control ring on lens to maximum F-Number
    1b1) if unknown ask for focal length, maximum and minimum apertures (choose from list)
    1b2) ask for user to input lens name to save in memory or on sd card
    1b3) display message to user:
    "turn aperture control ring so that aperture is closed as far as possible (F16+)" and "place camera with lens anywhere with a constant lighting setting" and "press ok to continue"
    1b4) once user presses ok the camera meters the light influx with the aperture control motor pushing the aperture lever fully open
    1b5) following this the camera step by step stops down the lens using the aperture control motor (using 10-20 steps) and after each steps meters again. This way the camera learns the exact position of the aperture lever for each meter reading. Some of the positions will be full stop positions (that is each position where the meter reading compared to the known fully open metering differs so much). The whole process should not take longer than a second or two.
    1b6) the camera saves to data into memory or on sd card
    2) from here on the user can choose aperture freely using the camera control wheels and use full functionality just like with A-type Pentax lenses, as the camera now knows exactly how far to push the aperture lever to set it to a certain aperture setting.
    Memory should hold at least 20 slots of lens data.

2) Hardwareverbesserungen Kamera:

  1. add proximity sensor to backside of camera near viewfinder to allow switching off the display when the face of the user is near. Add to option parameters to firmware: 1. nearness when to switch off 2. delay how long to keep the display off after user has moved back.
  2. WLAN integrieren, Durchsatzrate deutlich erhöhen
  3. Klappblitz und GPS gleichzeitig integrieren
  4. Mehr Autofokuspunkte
  5. AF weiter im Sicher verteilt
  6. Blitze über Funk steuern statt optisch
  7. Schnellere AF-Bearbeitung durch eigenen Prozessor
  8. Hybridsucher
  9. Schnellerere Elektronischer Verschluss (Pixelshift schneller möglich)
  10. Klapp-/Schwenkmonitor
  11. noch größerer Sucher mit mehr Vergrößerung
  12. schnellerer Verschluss, der kürzere Blitz-Sync als 1/180 zulässt
  13. AF-Mode Knopf etwas größer machen, damit er leichter zu ertasten ist

3) Verbesserungen Software FluCard:

  1. alle Kameramodi remote wählbar
  2. alle Funktionen des Infomenüs remote wählbar
  3. Belichtungsreihen remote möglich
  4. alle Funktionen des Steuerkreuzes remote wählbar, als auch WB, Farbmodus etc.
  5. AF Modus remote wählbar
  6. Belcihtungsmessung remote wählbar

4) Verbesserungen Apps:

  1. alle Kameramodi remote wählbar
  2. alle Funktionen des Infomenüs remote wählbar
  3. Belichtungsreihen remote möglich
  4. alle Funktionen des Steuerkreuzes remote wählbar, als auch WB, Farbmodus etc.
  5. AF Modus remote wählbar
  6. Belichtungsmessung remote wählbar
  7. App auch mit FluCard nutzbar machen


Zuletzt geändert von User_00317 am Fr 28. Aug 2015, 08:16, insgesamt 9-mal geändert.

Nach oben
  
Mit Zitat antworten  
BeitragVerfasst: So 9. Aug 2015, 23:08 
Offline
Benutzeravatar

Registriert: Fr 23. Dez 2011, 21:29
Beiträge: 413
Wohnort: Freiburg im Breisgau
Tolle Arbeit, auch wenn ich nicht alles davon brauche, sollte nichts davon gestrichen werden.

Da du auch Hardwareänderungen unter 2 aufführst, das Klappdisplay der K-S2 wäre schön an der K3 III

_________________
Meine Bilder unterliegen http://creativecommons.org/licenses/by- ... .0/deed.de" cc-by-nc-sa 3.0 Lizenz, sie dürfen bearbeitet und im selben Thread wieder eingestellt werden. Meine Bilder: https://commons.wikimedia.org/wiki/Category:Joergens.mi


Nach oben
 Profil Position des Users auf der Mitgliederkarte  
Mit Zitat antworten  
BeitragVerfasst: Mo 10. Aug 2015, 08:13 
joergens.mi hat geschrieben:
Tolle Arbeit, auch wenn ich nicht alles davon brauche, sollte nichts davon gestrichen werden.

Da du auch Hardwareänderungen unter 2 aufführst, das Klappdisplay der K-S2 wäre schön an der K3 III


Jup. Ist drin.


Nach oben
  
Mit Zitat antworten  
BeitragVerfasst: Mo 10. Aug 2015, 10:36 
Offline
Benutzeravatar

Registriert: Do 20. Nov 2014, 11:08
Beiträge: 1128
Wohnort: Nürnberg
Zur N. 3: kannst du da nicht einfach eine Belichtungsreihe aufnehmen und fertig, wenn ich ein HDR machen will dann ist doch das Ziel nur ein Bild zu haben oder verstehe ich da irgendetwas falsch???

Falls Diskussionen hier nicht rein sollen dann lösche ich meinen Beitrag auch gerne wieder ;)

_________________
[] []



Nach oben
 Profil Position des Users auf der Mitgliederkarte  
Mit Zitat antworten  
BeitragVerfasst: Mo 10. Aug 2015, 11:32 
chruztoph hat geschrieben:
Zur N. 3: kannst du da nicht einfach eine Belichtungsreihe aufnehmen und fertig, wenn ich ein HDR machen will dann ist doch das Ziel nur ein Bild zu haben oder verstehe ich da irgendetwas falsch???


Kann man machen, ist aber nicht genau das, was angestrebt ist. Hier geht es ja um den Fall, das ein User vor allem direkt in der Kamera ein HDR als JPG erzeugt haben will, aber zusätzlich noch die zugehörigen Rohdaten zur Sicherheit behalten will. Bei einer Belichtungsreihe hat er kein HDR. Manche Leute scheint das Sammel-DNG zu nerven.

Verständnisfragen wie die aktuelle können wir hier im Thread gerne diskutieren, die Frage, ob etwas besonders wichtig oder nötig ist eher nicht (weil da wird jeder User bei 50 Punkten seine Sicht haben). Hier geht es ja vorrangig um's sammeln.


Nach oben
  
Mit Zitat antworten  
BeitragVerfasst: Mo 10. Aug 2015, 11:38 
Offline
Benutzeravatar

Registriert: Fr 23. Dez 2011, 21:29
Beiträge: 413
Wohnort: Freiburg im Breisgau
beholder3 hat geschrieben:
Manche Leute scheint das Sammel-DNG zu nerven.
Das nerven ist verständlich, da keiner der großen Raw-Konverterhertseller bisher den Zugriff auf die Einzelbilder ermöglicht (pentax eigene SW ausgenommen), dies gilt sowohl für Pixelshift als auch für HDR. Meines Wissens, gibt es eine Spezialversion von dcraw mit der zumindest ein Pixeshift in 4 tiff 16 Bilder zerlegt werden kann.
Wenn Pentax das einführt gibt es dann zwar kleinere Schwierigkeiten mit den Filenamen, der 3 oder 4 Bilder, aber das sollte das kleinste Problem sein.

_________________
Meine Bilder unterliegen http://creativecommons.org/licenses/by- ... .0/deed.de" cc-by-nc-sa 3.0 Lizenz, sie dürfen bearbeitet und im selben Thread wieder eingestellt werden. Meine Bilder: https://commons.wikimedia.org/wiki/Category:Joergens.mi


Nach oben
 Profil Position des Users auf der Mitgliederkarte  
Mit Zitat antworten  
BeitragVerfasst: Mo 10. Aug 2015, 11:59 
joergens.mi hat geschrieben:
Meines Wissens, gibt es eine Spezialversion von dcraw mit der zumindest ein Pixeshift in 4 tiff 16 Bilder zerlegt werden kann.


Soweit ich das verstehe, kann jedes dcraw die vier Teilbilder als TIFF rausziehen mit der Option "-s" und einer laufenden Nummer von 0-3. Ein "-s 0" zieht das erste Bild raus.

Tom's Variante findet man übrigens unter http://www.v7f.eu/public/pentax/.

Weiterhin kann die neueste Adobe ACR 9.1.1 Variante angeblich auch Pixelshift DNGs verarbeiten (wie gut steht auf einem anderen Blatt, da es wohl keinen Parameter für das Deghosting gibt): http://www.photoscala.de/Artikel/Adobe- ... -Lightroom


Nach oben
  
Mit Zitat antworten  
BeitragVerfasst: Mo 10. Aug 2015, 13:09 
Offline
Benutzeravatar

Registriert: Do 28. Mär 2013, 18:19
Beiträge: 2122
-Frei wählbare Selbstauslöser Zeit von 2s - 1min
-Kürzere Blitz Synchronisierungszeiten 1/2000
-Frei einstellbare Langzeitbelichtungszeit in der Kamera
-AF Mode Knopf etwas positioniert, erhabener ( besser zu ertasten )
-Die Auswahl der SD Karteschächte frei belegbar


Nach oben
 Profil  
Mit Zitat antworten  
BeitragVerfasst: Mo 10. Aug 2015, 14:55 
norbi hat geschrieben:
-Die Auswahl der SD Karteschächte frei belegbar


Die nadren sachen mabe ich mal aufgenommen aber das musst Du mir erklären.
Bei der Wiedergabe kann man schon per Knopfdruck umschalten. Für die Aufnahme ist ein Umschalten oben in der Liste vorgeschlagen. Was genau fehlt Dir noch?


Nach oben
  
Mit Zitat antworten  
BeitragVerfasst: Mo 10. Aug 2015, 16:17 
Offline
Benutzeravatar

Registriert: Do 28. Mär 2013, 18:19
Beiträge: 2122
beholder3 hat geschrieben:
norbi hat geschrieben:
-Die Auswahl der SD Karteschächte frei belegbar


Die nadren sachen mabe ich mal aufgenommen aber das musst Du mir erklären.
Bei der Wiedergabe kann man schon per Knopfdruck umschalten. Für die Aufnahme ist ein Umschalten oben in der Liste vorgeschlagen. Was genau fehlt Dir noch?


Ja oben steht alles in auswärts und mein spenglisch ist nur rudimentär vorhanden :yessad: :cry: :oops:
Was mich halt nervt ist das bei RAW+ ( in Schacht 1 RAW und in 2 JPEG ) und beim umschalten auf nur JPEG, die Kamera nicht weiter auf 2 schreibt sondern auf die RAW Karte in Schacht 1

Aber wenn es oben schon steht :2thumbs:

Gruß Norbert


Nach oben
 Profil  
Mit Zitat antworten  
Beiträge der letzten Zeit anzeigen:  Sortiere nach  
Ein neues Thema erstellen Auf das Thema antworten  [ 26 Beiträge ]  Gehe zu Seite 1, 2, 3  Nächste

Alle Zeiten sind UTC + 1 Stunde


Wer ist online?

0 Mitglieder


Ähnliche Beiträge

Rasierhobel Sammlung
Forum: Offene Galerie
Autor: He-Man
Antworten: 4
Nächtliches (Verbesserungsvorschläge, Tipps?)
Forum: Einsteigerbereich
Autor: Silaris
Antworten: 3
K3 Verbesserungsvorschläge
Forum: DSLR
Autor: Ribavel
Antworten: 42
Sammlung Joseph Kiblitsky, Malerei – Skulptur - Fotografie
Forum: Small Talk
Autor: Anonymous
Antworten: 0

Du darfst keine neuen Themen in diesem Forum erstellen.
Du darfst keine Antworten zu Themen in diesem Forum erstellen.
Du darfst deine Beiträge in diesem Forum nicht ändern.
Du darfst deine Beiträge in diesem Forum nicht löschen.

Suche nach:
cron
Powered by phpBB® Forum Software © phpBB Group


Hosted by iphpbb3.com

Impressum | Datenschutz